BK series Machine Tool Control Transformer Capacity100VA

1.Copper wire 2.Capacity:25VA~5000VA 3.Rated voltage 500V and below 4.50/60Hz 4.Can be disigned by your requirement

1. APPLICATION:

BKseries machine tool control transformer which based on domestic BK series machine tool control transformer, adopt strongpoint of national and international similar products further, with advanced technology and strict design, select good junction terminal, it has several advantages such as low power consumption, reduced size, better performance and wide applicability, which is an ideal transformation power supply.

It is applicable to the AC circuit of 50-60 Hz and input voltage up to 1000V. Its used as a power supply for the machine tool control electrical appliances part lighting and indicator usually, also is used as the small power source.

Pls pay attention to that power voltage waveform is similar to sine wave.

  BKX-Z   B: Machine Tool Transformer   K: Control  X: Design serial number(1,2,3,4)  Z: Rated Capacity2. Working Enviconment1.Ambient air temperature: -5°C~+40°C, the highest monthly mean temperature should not exceed +30°C;2.Altitude for installing place should not exceed 1000m;3.When the ambient  air  temperature is +40°C, the relative humidity should  not  exceed 50%, and  it allows  higher relative humidity under lower temperature. Max average humidity in the  dampest month is 90%,  meanwhile  the lowest  average  temperature  of  this  month is  + 25°C,  and  condensation  on  the  product  surface  caused  bytemperature change should be taken into consideration. 3. BK Control Transformer Outline and Install dimension

Model	Input Voltage	Output Voltage	Istallation Dimension     (A×C)mm	Mounting Hole      (K×J)	Overall Dimensions   (B×D×E)mm
BK-25VA	220V±10%380V±10% Or as your  requirement	6V12V24V36V110V127V220V380V(Special   can be design)	65×50	5×7	76×80×77
BK-50VA			70×60	6×8	87×94×87
BK-100VA			85×65	6×8	97×101×92
BK-150VA			85×75	6×8	108×100×101
BK-200VA			85×80	6×8	108×107×101
BK-250VA			95×95	8×11	120×105×112
BK-300VA			95×105	8×11	120×115×112
BK-400VA			110×100	8×11	147×123×135
BK-500VA			110×100	8×11	147×138×135
BK-800VA			135×119	8×11	147×148×135
BK-1000VA			135×135	8×11	147×158×150
BK-1500VA			150×140	8×11	180×220×195
BK-2000VA			155×170	8×11	190×220×215
BK-2500VA			165×175	8×11	215×230×240
BK-3000VA			165×1180	8×11	215×245×240
BK-5000VA			195×195	8×11	250×265×280

BK series Machine Tool Control Transformer Capacity100VA